





Vatrer 24V 200Ah Marine Trolling Motor Lithium Deep Cycle Battery
-4°F to 140°F Operating Range: Functions reliably from -4°F to 140°F, with low-temp cutoff below 32°F for cold-water trolling motor use.
5,120Wh Energy Capacity: The Vatrer 24V 200Ah deep cycle battery provides a robust 5,120Wh energy capacity, powering your trolling motor for up to a full day of fishing.
5,000+ Deep Cycles: Enjoy over 5,000 deep cycles, offering a decade or more of use compared to just 300-500 cycles from lead-acid batteries.
200A Continuous Discharge: Delivers a strong 200A continuous discharge rate, supporting 80-100 pound thrust trolling motors for extended marine trips.
33% Lighter Design: Weighs 33% less than lead-acid batteries at 80.69 lbs, reducing boat drag and improving maneuverability.
40.96kWh Scalable Capacity: With a 4P2S configuration, scale up to 51.2V 800Ah for a total of 40.96kWh, perfect for large energy needs.
100% Charging Efficiency: Achieves up to 100% charging efficiency with a 29.2V 40A LiFePO4 charger in just 5 hours.
Exclusion of Hawaii (HI), Alaska (AK), and Puerto Rico (PR)
Runtime Calculation
Safety Certifications
Unified Power and Durability for Marine Trolling
The Vatrer 24V 200Ah lithium deep cycle battery offers a dependable power source tailored for marine trolling motor applications, delivering a solid 5,120Wh energy capacity with a built-in 200A battery management system for smooth operation. Compared to traditional lead-acid batteries, it's 33% lighter and 20% smaller, reducing boat drag and enhancing maneuverability for long fishing trips. This durability is further backed by an impressive 5,000+ deep cycles, far outlasting the 300-500 cycles of lead-acid options, which translates to a decade or more of use. For boaters relying on their trolling motor day after day, this combination of reliable power and enduring performance means better value and less frequent replacements, making it a practical choice for extended marine adventures.
Advanced BMS and LiFePO4 Cells
The Vatrer 200Ah deep cycle battery built-in 200A BMS, it combines a trustworthy battery management system (BMS) with high-quality automotive-grade LiFePO4 cells to deliver both safety and stable power. The smart BMS works quietly to prevent overcharging, over-discharging, over-current, and short circuits, maintaining a low self-discharge rate while including a high-temperature cutoff above 167°F (75°C) and a low-temperature cutoff for extreme conditions—ideal for marine trolling motor use in cold waters. Paired with this, the LiFePO4 cells offer higher energy density and no memory effect, supporting fast charging and discharging with up to 100% efficiency.
Effective Low-Temperature Protection for Cold Waters
This Vatrer 24V 200Ah deep cycle battery is equipped with a comprehensive low temperature protection system and is designed specifically for marine trolling motors, ensuring reliable performance in cold water conditions. It automatically stops charging when temperatures drop below 32°F / 0°C to prevent damage to the lithium battery cells, and halts discharging below -4°F / -20°C to maintain battery health during freezing conditions. Once temperatures rise above 41°F / 5°C, the system intelligently resumes charging, allowing seamless operation as conditions improve. This multi-layered protection not only safeguards the battery during winter fishing trips or icy marine environments but also extends its lifespan by avoiding stress from extreme cold. For trolling motor users, this means consistent power delivery even in challenging weather, making it a practical choice for year-round boating.
Robust Power and Capacity for Trolling Motors
The Vatrer 24V lithium battery delivers a strong 200A continuous discharge rate, making it a reliable choice for trolling motors with 80-100 pound thrust models. This high discharge rate ensures your deep cycle battery can handle long fishing trips without losing power. Paired with an ample 5,120Wh energy capacity and 5,120W maximum load capacity, it's built to run multiple devices simultaneously—think powering a trolling motor for a full day or an RV fridge for over 17 hours. This combination of robust performance and versatile energy makes the Vatrer 200Ah deep cycle battery a practical solution for marine and camping needs alike.
Scalable 4P2S Configuration for Enhanced Energy Needs
For users requiring greater power capacity, the Vatrer battery offers a scalable 4P2S configuration, allowing you to connect up to four batteries in parallel and two in series. This setup can expand the system to a 51.2V 800Ah pack, delivering a total energy capacity of 40.96kWh. This flexibility is ideal for meeting the demands of extended marine trolling motor trips, large off-grid energy storage systems, or RV setups with multiple high-power devices. The parallel connection ensures increased current capacity for sustained discharge, while the series connection boosts voltage, making it a practical solution for customizing power output to match specific deep cycle applications without compromising performance or safety.
Flexible Charging Options for Convenience
Keeping your Vatrer 200Ah deep cycle battery charged is convenient with a variety of methods tailored to different scenarios. You can use a LiFePO4 charger (29.2V 40A) to fully charge it in about 5 hours, ideal for quick recharges at a dock or home base. For off-grid adventures, a solar panel with an MPPT controller (1000W) can recharge the battery in approximately 6 hours per day of good sunlight, offering a sustainable option for marine or camping use. Additionally, pairing a generator with a 40A DC-to-DC charger takes around 5 hours, providing a reliable backup during extended trips without solar access. These charging options ensure flexibility, allowing you to adapt to changing conditions whether you're on the water, in an RV, or off-grid, keeping your trolling motor and other devices powered without interruption.
Diverse Applications Across Multiple Needs
Beyond trolling motors, this deep cycle battery serves a wide range of uses, including RVs, off-grid systems, and home energy storage. For RV enthusiasts, it extends travel time by powering appliances like lights and fridges during long trips. In off-grid setups, it provides a steady energy supply for remote cabins or solar systems, reducing reliance on fuel generators. For home energy storage, it acts as a backup power source during outages, supporting essential devices such as heaters or medical equipment. This versatility ensures the Vatrer 200Ah deep cycle battery meets various power demands, making it a practical choice for both mobile and stationary applications.
Why Choose Vatrer and Take Action Today
The Vatrer 200Ah deep cycle battery is well-suited for trolling motor users, offering robust performance in cold waters thanks to its low-temperature protection and delivering 2-3 times the runtime of lead-acid batteries during extended use. Its design reduces carbon footprint, making it a practical choice for those prioritizing safety and sustainability. Backed by advanced LiFePO4 technology, this 24V lithium battery is ready to power your marine adventures. Add it to your cart now or contact Vatrer team for personalized advice—we’re here to ensure you get the most from your deep cycle battery setup with Vatrer’s expertise in lithium solutions.
Specification | Value |
---|---|
Battery Model | LiFePO4 Battery 25.6V 200Ah |
Nominal Voltage | 25.6V |
Charge Voltage | 28.4V - 29.2V |
Weight | 80.69LBs / 36.6KG |
Energy | 5120Wh |
Max Continuous Charging Current | 200A |
Max Continuous Discharging Current | 200A |
Recommend Charge Current | 40A (0.2C) |
Max Load / Inverter Power | 5120W |
Operating Temperature Range | Charge: -4°F to 122°F (-20°C to 50°C) Discharge: -4°F to 140°F (-20°C to 60°C) Storage: 14°F to 122°F (-10°C to 50°C) Low temp cut off protection (Discharge): -4°F ± 7.2°F (-20°C ± 4°C) |
Waterproof Class | IP65 |
Terminal Type | M8 |
Dimension | 20.47x10.59x8.66 inch 520x269x220 mm |
Accessories | 1*24V 200Ah LiFePO4 Battery, 2*M8 Terminals, 2*Caps |
Yes, the Vatrer 24V 200Ah deep cycle battery is built with an IP65 waterproof and dustproof rating, making it suitable for heavy rain and snowy conditions often encountered during marine trolling motor use. Its low-temperature protection also kicks in below 32°F / 0°C to prevent damage, ensuring reliable performance even in harsh weather.
With a 1000W solar panel and an MPPT controller, you can expect to fully charge the Vatrer 200Ah deep cycle battery in about 6 hours per day of good sunlight. Charging time may vary based on weather and panel efficiency, so it’s a good idea to monitor conditions for consistent power supply.
Absolutely, thanks to the built-in battery management system (BMS), the Vatrer lithium battery has a low self-discharge rate, allowing it to hold its charge when not in use. For best results, store it in a cool, dry place and check the charge every few months to maintain optimal health.
The Vatrer 200Ah deep cycle battery features a low-temperature cutoff that halts charging below 32°F / 0°C and discharging below -4°F / -20°C to protect the lithium battery cells. If this happens, simply move it to a warmer environment above 41°F / 5°C, and the system will automatically resume operation once safe conditions are met.
No, the Vatrer 24V lithium battery is designed specifically for deep cycle applications like trolling motors and not for starting engines. Its high discharge rate and capacity are optimized for sustained power delivery rather than the high burst needed for engine starts.
The 4P2S setup, which scales the Vatrer battery to a 51.2V 800Ah pack with 40.96kWh, is ideal if you need extended runtime for trolling motor trips or larger off-grid systems. Assess your power demands—such as running multiple devices—and consult Vatrer’s team for advice on configuring it safely.
The smart BMS in the Vatrer 200Ah deep cycle battery prevents overcharging by automatically cutting off power when the battery is full, protecting the lithium battery cells from damage. Always use a compatible LiFePO4 charger to avoid any issues.
Yes, the Vatrer 24V lithium battery works well with solar panels using an MPPT controller, charging efficiently in about 6 hours with a 1000W setup. Check your system’s voltage and current ratings to ensure compatibility, and consider consulting a professional for seamless integration.
Subscribe to Our Newsletter
Join our community. Get the latest news & offers!

